|
15
|
Depending on model, axle and year, Nissan vehicles have different diameters in the shoulder of the studs. The following list provides notes and measurements of the shoulder studs required for installation. The wheel spacers shown in the catalog will be supplied with shoulder bolts d = 14.25. If you need d = 12.85, please add a “1” at the end of the part number.
DRS Wheel Spacers - Nissan
DRS wheel spacers / required DRS shoulder |
| Vehicle | Model | Shoulder | Front Axle/Shoulder | Rear Axle |
| SENTRA | B13 | GA 16 + SR20 DE | large 14.25mm | large 14.25 mm |
| 100 | NX | B13 GA 16 + SR 20 DE | large 14.25 mm | large 14.25 mm |
| 200 SX | S13 | CA18 T | small 12.85 mm | small 12.85 mm |
| 200 SX | S14 | SR 20 DET | large 14.25 mm | small 12.85 mm |
| 300 ZX | Z32 | VG 30 DTT | large 14.25 mm | small 12.85 mm |
| MAXIMA | J30 | up to 10/91 | small 12.85mm | small 12.85 mm |
| | up to 12/94 | large 14.25 mm | small 12.85 mm |
| | from 01/95 | large 14.25 mm | large 14.25 mm |
| MAXIMA | A32 | VQ 20 + 30DE | large 14.25 mm | large 14.25 mm |
|